Activators

• Econovate - Highly activating dry acid salt for use on ferrous and non-ferrous metals
  
• Econovate A - A hydrofluoric acid replacement to enhance nitric acid for an effective acid etch and when used in low concentrations with nitric acid it is an ideal deoxidizer/desmut. Used as an acid etch in surface prep sequence for chemical conversion coating, zincating and anodizing where polished surfaces are to be maintained.
  
• Econovate Plus - Tri-Acid Salts enhanced formula produces a deeper cleaned, smut-free surface on many metals including steel/stainless steel, cast iron, copper, brass, zinc die-castings, aluminum, nickel, silver and lead alloys. Is designed to replace a variety of conventional mineral acids with a higher tolerance to oil contamination than liquid acids.  Can be set up as a cathodic activator/scale remover.
  
• Alzon - A Zincate process developed to produce a thin, tightly adherent zinc-alloy film on aluminum. The film provides an excellent adhesion undercoat primarily for electroless nickel and can be used prior to electroplating processes.
  
• Alzon CF - A cyanide-free Zincate process.
  
• Brasspol - Chemical polish and debur for Copper and Copper Alloys.
  
• Procirc 900 - Chemical polish and debur for Copper.
  

At MPS we offer many different chemicals for many different industries.  Our most popular products are listed below under each category tab.  If you do not see what you are looking for, please contact us.